Torque Wrench 2025 Test: Which Brand Wins?

China

China

China

Taiwan

Taiwan

Taiwan

Taiwan

Taiwan (product of Taiwan, finished in mainland China)

Taiwan

China

Taiwan

or 3.47 lb

or 3.33 lb

or 3.25 lb

or 3.33 lb

or 3.37 lb

or 3.3 lb

or 4.11 lb, by far the heaviest at that point in the video

or 3.79 lb

or 2.93 lb, pretty light

or 3.395 lb

torque range 25 to 250 ft lb, claimed accuracy plus or minus 2%, measures newton meters/inch pounds/foot pounds/kilograms per meter, includes 1/4 in and 3/8 in adapters, three modes (real time, peak, preset memory)

torque range 3.8 to 250.8 ft lb, claimed accuracy plus or minus 1% (claimed more accurate than the $790 Snap-on), 1/2 in drive, real-time track mode, backlit display

torque range 3.76 to 250.8 ft lb, buzzer and LED, claimed accuracy plus or minus 2% clockwise, five measurement modes, claimed 20,000 accuracy tests per unit

torque range 50 to 250 ft lb, LED backlit screen, bi-material handle

torque range 12.5 to 250 ft lb, requires 2 AA batteries (included), claimed accuracy plus or minus 2% clockwise and 3% counterclockwise

torque range 50 to 250 ft lb, backlit LCD screen, requires AA batteries (included)

flex head (unique among the wrenches tested), 72 tooth ratchet, roughly 5 degree arc swing, torque range 12.5 to 250 ft lb, claimed accuracy plus or minus 2% clockwise and 3% counterclockwise

torque range 25 to 250 ft lb, electronic with a click-style mechanism, reversible ratchet, claimed accuracy plus or minus 3% clockwise and 6% counterclockwise

ratcheting mechanism, claimed 5 degree arc swing, claimed accuracy plus or minus 2% clockwise and 3% counterclockwise, requires 3 AAA batteries (not included), vibrating handle, buzzer, LED

claimed accuracy plus or minus 2%, claimed to stay precise for over 15,000 uses without recalibration, 72 tooth ratchet head, claimed 5 degree arc swing, green light at 85-90% of torque and red light at 100%

torque range 25 to 250 ft lb, measures clockwise and counterclockwise, audible buzzer, includes certificate of calibration

attempts: 0.10, 0.21, 0.16, 0.18, just over half a pound; described as by far the most accurate torque wrench at that point in the video

attempts: 0.59, 0.57, 0.27 (best yet at that point), 0.77, perfect on the fifth attempt

attempts: 0.37, 0.09, 0.48, 0.27, 0.6 ft lb, good enough for second place behind VEVOR at this stage

attempts: 0.7, perfect (0), 0.56, 0.25, 0.29 ft lb; moved into third place behind COOBEAST at this stage

attempts: more than a foot pound, 0.55, 0.84, 0.84, 0.9 ft lb

attempts: 0.6, 0.54, 0.71, 0.71, just over a foot pound

attempts: 0.4, 0.57, 0.27, 0.42, 0.72 ft lb; off by just under half a foot-pound error on average

attempts (overshot target each time): 0.65, 0.79, 0.63, 1.09, 0.74 ft lb; certificate of calibration suggested this was not as accurate as some other brands

attempts: way over target by almost 2 lb, 0.78, 0.9, 1.14, 1.23 ft lb; trailed SUERCUP and COOBEAST at this stage

attempts: 1.44, off by 2 lb, 1.54, 1.19, 1.62 ft lb; average error of 1.57 ft lb

attempts vs a $1,800 torque wrench calibration tool: 0.98, 1.53, 2.96, 1.2 ft lb; average error of 1.67 lb

attempts: 0.35, 1.54, 2.33, 1.13, 1.25 ft lb, far less accurate after cycling; named among the wrenches that were 'way out of calibration' post-cycle

attempts: 0.12, 0.51, 0.39, 0.18, 0.09 ft lb, still very accurate; described as remaining highly precise before and after 1,000 cycles with no error in excess of 2%

attempts: 0.07, 0.12, 0.05, 0.23, 0.32 ft lb; actually more accurate than when new after break-in; finished second place post-cycle at an average of 0.16 ft lb

attempts: 0.10, 0.16, 0.05, 0.02, 0.21 ft lb, held up fine; finished FIRST place post-cycle at an average of 0.11 ft lb

attempts: 0.11, 0.12, 0.68, 0.08, 0.24 ft lb, held up fine

attempts: 0.37, 0.12, 0.09, 0.31, 0.16 ft lb, continues to perform very well

attempts: 0.66, 0.51, 0.51, 0.7, 0.53 ft lb, took a small toll from cycling

attempts: 0.28, 0.6, 0.38, 0.6, 0.49 ft lb, pretty accurate

attempts: 2.45, 4.09, 2.58, 2.54, 3 ft lb, almost as poor as SUZUME after cycling; named among the wrenches 'way out of calibration' post-cycle

attempts: 2.84, 2.6, 3.03, 3.57, 3.09 ft lb, described as totally cooked; named among the wrenches 'way out of calibration' post-cycle

attempts: 1.43, 1.43, just over two, 1.58 ft lb; named among the wrenches 'way out of calibration' post-cycle

one of the wrenches showing the biggest accuracy improvement after the 1,000-cycle break-in period

host was nearly as accurate hitting the 50 ft lb target with this wrench, averaging 50.26 ft-lb

host averaged 50.29 ft-lb hitting the 50 ft lb target with this wrench

tied for second place for standard deviation at 0.15 ft lb (with Icon)

tied for second place for standard deviation at 0.15 ft lb (with DeWalt)